Paradyne JetFusion Integrated Access Device - Manual (Page 148)

2000-A2-GB20-10 - 129 - February 2004
Figure 7–2. Voice Configuration Menu (POTS Telephone Interface)
Figure 7–3. Voice Configuration Menu (ISDN Telephone Interface)
Type the option number of the voice gateway to set.
2. The IAD saves the voice gateway you’ve selected and displays the
Voice Gateway Selection menu.
3. Press Escape to return to the Voice Configuration menu and continue
with other voice path configuration.
4. Reset the IAD (page 14 ) when you finish voice path configuration.
When you choose a specific voice gateway, the IAD displays option E on
the Main menu specifically for the voice gateway you’ve selected. Proceed
to the section for configuring a specific gateway:
‹ MGCP 0.1/NCS 1.0—page 139
‹ CopperCom—page 142
‹ Jetstream—page 144
‹ AAL2/LES CAS—page 146
‹ MGCP 1.0—page 139
‹ AAL2/LES ELCP—page 150
*******************************************
Voice Gateway Selection
*******************************************
Current Voice Gateway is MGCP 1.0
0. No Voice Gateway
1. MGCP 0.1/NCS 1.0
2. CopperCom
3. Jetstream
4. AAL2/LES CAS
5. AAL2/LES ELCP
6. MGCP 1.0
Currently selected
voice gateway
LAN LINK LAN ACT WAN LINK VOICE POWER
JF2004i,
JF2104i Figure 7-3 displays the list of valid gateways for IADs with an
ISDN telephone interface.
*******************************************
Voice Gateway Selection
*******************************************
Current Voice Gateway is MGCP 1.0
0. No Voice Gateway
1. Jetstream
2. AAL2/LES ELCP
Currently selected
voice gateway
NOTE If you select option MGCP 0.1/NCS 1.0 or MGCP 1.0, the IAD
an option to manage MGCP/NCS Embedded Client (option
O) on the Main menu. Otherwise, option O is not displayed.