Paradyne JetFusion Integrated Access Device User Manual
Page 13
2000-A2-GB20-10
- xi -
February 2004
The JetFusion Family IAD User Guide contains the information you need
to install, connect and configure each JetFusion IAD in a customer’s
premises.
Audience
This guide is intended for network engineers and other professionals in the
telecommunications industry who are engaged in the installation,
configuration, management and support of telephone and computer
networks, network access products, and related equipment.
Contents
The guide contains the following chapters and appendixes:
This preface describes the audience, how this guide is organized,
safeguards you should always observe, and warranty and regulatory
notices.
, introduces the features of the IADs,
including the hardware, indicators and ports.
, describes the process of getting
an IAD up and running in a typical customer premises. This chapter is
helpful if you are new to IADs, because it lists each step, beginning with
unpacking the IAD. It also provides information about logging on, using the
menu interface, setting the IP address, basic configuration tasks and
restarting the IAD. Once you have read this chapter, you will be well-
prepared to use the remaining reference chapters.
, provides information about IAD
security, configuring Simple Network Management Protocol (SNMP),
upgrading ACOS, system utilities and other topics.
, details how to configure the
JetFusion IAD for physical connection to the network—T1/E1 and xDSL,
Frame Relay and ATM, and TDM Voice for channelized T1 circuits.
describes the steps to
configure the IAD as a router, including setting IP addresses, static routes,
configuring RIP, DNS Client, DHCP Client and other router settings.
, provides details about
setting up the IAD as a bridge, including setting bridging globally or by
port, setting the aging timer, and enabling Spanning Tree support.
Chapter 7,
, describes how to set up
voice ports for use in various DSLAM and voice gateway environments.
3UHIDFH