Paradyne JetFusion Integrated Access Device - Manual (Page 64)

2000-A2-GB20-10 - 45 - February 2004
Type the name of the file and press Enter. To exit without transferring
the file, press Escape or Enter without typing the file name.
4. When XMODEM is selected, if the file is not located, the IAD prompts
you for the file transfer speed.
5. The IAD transfers the file via TFTP or XMODEM.
6. Reset the IAD (page
14 ) to utilize the new file. If you transfer acos.bin
using this option, perform a hard reset (page 37 ).
Using the TFTP Server Menu
Type T to enable and disable read access, write access and console
output.
Figure 3–12. TFTP Server Menu
The IAD displays the current settings directly below the menu heading. To
successively enable or disable access or output, execute the option again.
The IAD saves the configuration and displays the menu. When the options
are set correctly, reset the IAD for the changes to take effect.
***************************************************
TFTP Server Menu
***************************************************
Read access = enabled
Write access = disabled
Console output = disabled
R. Toggle Read Access
W. Toggle Write Access
Q. Toggle Console Output