Paradyne JetFusion Integrated Access Device User Manual

Page 48

2000-A2-GB20-10

- 29 -

February 2004

Enabling and Disabling SNMP via IP

Type E to enable or disable SNMP via IP:

1. The IAD displays the current status of SNMP and a prompt:

SNMP via IP is currently DISABLED

To enable SNMP, type E. To disable SNMP, type D.

2. The IAD saves the configuration (if changed). Continue with other

SNMP settings, or press Escape to return to the Main menu.

) for changes to take effect.

Enabling and Disabling SNMP via EOC

Type F to enable or disable SNMP via EOC:

1. The IAD displays the current status of SNMP and a prompt:

SNMP via EOC is currently DISABLED

To enable SNMP, type E. To disable SNMP, type D.

2. The IAD saves the configuration (if changed). Continue with other

SNMP settings, or press Escape to return to the Main menu.

) for changes to take effect.

Enabling SNMP via IP and EOC

Type A to enable SNMP via IP and EOC.

The IAD saves the configuration. Continue with other SNMP settings, or
press Escape to return to the Main menu.

) for changes to take effect.

Disabling SNMP via IP and EOC

Type B to disable SNMP via IP and EOC.

The IAD saves the configuration. Continue with other SNMP settings, or
press Escape to return to the Main menu.

) for changes to take effect.

Configuring the System Contact

Type P to configure system contact (up to 39 alphanumeric characters):

1. The IAD displays the current system contact and prompt:

System Contact is currently: Paradyne
Enter new System Contact >

Type the name of the new contact person or department and press
Enter.

2. The IAD save the configuration. Continue with other SNMP settings, or

press Escape to return to the Main menu.