Paradyne JetFusion Integrated Access Device - Manual (Page 254)

2000-A2-GB20-10 - 235 - February 2004
set wan rip
Description. Enables and disables RIP on a WAN IP port. If you do not
enter any optional parameters, it will find the first available slot, interface
and port.
set wan rip
(slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) RIP on the specified port.
version 1 | 2Bcst | 2Mlti
Keyword identifying version to implement. (Must be preceded by
keyword version)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)
show con-
figuration
Description. Displays the current configuration.
show configuration
show dhcp
server con-
figuration
Description. Displays the DHCP server configuration.
show dhcp server configuration
show ip
routes
Description. Displays the IP route table.
show ip routes
tftp receive
Description. Receives a file from the TFTP server identified by the IP
address. The file must exist in the default directory of the TFTP server.
tftp receive
IP address
IP address of TFTP server.
file name
name of file to receive.