Paradyne JetFusion Integrated Access Device - Manual (Page 114)

2000-A2-GB20-10 - 95 - February 2004
Quick Con-
figuration
The JF2304 and JF2308 contain a number of predefined configurations for
physical connections and PVCs.
To use one of the predefined configurations:
1. On the Main menu, type 5 to select Configure WAN.
2. The IAD displays the WAN Configuration menu.
Figure 4–66. WAN Configuration Menu
Type 0 to select Quick Configuration.
3. The IAD displays the Quick Configuration menu.
Figure 4–67. Quick Configuration Menu
4. Type the option corresponding to the DSLAM to which the IAD is
connected.
5. The IAD automatically resets.
6. To continue configuration, log back on to the IAD.
LAN LINK LAN ACT WAN LINK VOICE POWER
JF2304
JF2308 The Quick Configuration option is displayed only on the
JF2304 and JF2308.
*****************************************
* WAN Configuration menu *
*****************************************
Configuring SDSL
0. Quick Configuration
1. Configure Datalink Protocol
2. Configure Physical Interface
*****************************************
Quick Configuration
*****************************************
** System will reset after changing configuration **
Current configuration:
Differs from listed configurations
1. Lucent Stinger (Conexant Autobaud, Payload
Scrambling)
2. Nokia (Auto Cycle)
3. Coppermountain (Auto Sense)
4. Paradyne (Unframed 784kbps, Payload Scrambling)
5. AccessLan CPE
6. ATM (Unframed, 1152kbps fixed)
7. Frame Relay (784kbps fixed)