Set bridge stp global, Set dhcp server enable, Set dhcp server gateway – Paradyne JetFusion Integrated Access Device User Manual
Page 244: Set dhcp server subnet, Set dhcp server dns, Set dhcp server netbios, Set dhcp server domain
2000-A2-GB20-10
- 225 -
February 2004
set bridge
stp global
Description. Enables or disables Spanning Tree Protocol globally.
set bridge stp global
on | off
Keyword to enable (on) or disable (off) STP globally.
set dhcp
server
enable
Description. Enables or disables DHCP server on the IAD.
set dhcp server enable
on | off
Keyword to enable (on) or disable (off) DHCP server.
set dhcp
server
gateway
Description. Sets the DHCP server default IP address.
set dhcp server gateway
IP address
IP address of the DHCP server, in octal format (999.999.999.999)
set dhcp
server
subnet
Description. Sets the DHCP server default subnet mask.
set dhcp server subnet
subnet mask
Subnet mask in octal format (255.255.255.255)
set dhcp
server dns
Description. Sets the DHCP DNS server IP address.
set dhcp server dns
IP address
IP address in octal format (999.999.999.999)
set dhcp
server
netbios
Description. Sets the DHCP NetBIOS server IP address.
set dhcp server netbios
IP address
IP address in octal format (999.999.999.999)
set dhcp
server
domain
Description. Sets the DHCP server domain name.
set dhcp server domain
domain name
Fully-qualified domain name