Siemens ISGS SG8158-00 User Manual

Page 2

IMPORTANT

The information contained herein is general in nature and not intended for

specific application purposes. It does not relieve the user of responsibility to

use sound practices in application, installation, operation, and maintenance

of the equipment purchased. Siemens reserves the right to make changes

at any time without notice or obligations. Should a conflict arise between the

general information contained in this publication and the contents of draw-

ings or supplementary material, or both, the latter shall take precedence.

NOTE

These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible

contingency to be met in connection with installation, operation, or maintenance. Should further information be

desired or should particular problems arise which are not covered sufficiently for the purchasers purposes, the

matter should be referred to the local sales office.

The contents of the instruction manual shall not become part of or modify any prior or existing agreement, com-

mitment or relationship. The sales contract contains the entire obligation of Siemens Energy & Automation, Inc.

The warranty contained in the contract between parties is the sole warranty of Siemens Energy & Automation, Inc.

Any statements contained herein do not create new warranties or modify the existing warranty.

QUALIFIED PERSON

For the purposes of this manual, a qualified person is one who is familiar

with the installation, construction, or operation of the equipment and the

hazards involved. In addition, this person has the following qualifications:

(a) is trained and authorized to de-energize, clear, ground, and tag cir-

cuits and equipment in accordance with established safety practices.

(b) is trained in the proper care and use of protective equipment such as

rubber gloves, hard hat, safety glasses or face shields, flash

clothing, etc. in accordance with established safety procedures.

isv3o_1.bk : isv3o_fc.frm Page 2 Wednesday, August 7, 1996 10:51 AM