FUJITSU Primergy RX200 S2 - Manual (Page 82)

82
Chapter 3 OS Installation Using ServerStart
10
Set items and click [leave wizard].
The display returns to the expert mode window.
3.3.4 Application Wizard
Specify installation of supplied applications such as high reliability tools.
For details on the application wizard, refer to "3.1.6 Application Wizard" ( pg.67).
3.3.5 Starting OS Installation
Install the OS to the server.
When the installation partition is not empty, a confirmation message appears. If it does not matter, click
[OK] to continue the installation procedure.
If an incorrect setting (such as the CD key) is found during installation, an error window will appear.
Enter the correct value in the window to continue the installation procedure. However, corrections
made here are not reflected to the configuration file.
1
Click [Click here, to Start the Installation of (OS)].
A confirmation window asking whether you want to save the current settings appears.
2
Click [Yes].
The following window appears.