FUJITSU Primergy RX200 S2 - Manual (Page 187)

187
PRIMERGY RX200 S2 User’s Guide
Inst
allin
g I
nte
rn
al O
pti
ons
7
7.6 Installing an Internal CD-ROM
Drive Unit
This section explains the procedure for installing a CD-ROM drive.
7.6.1 Installable Internal CD-ROM Drive Units
■ Installable Internal CD-ROM Drive Units
The following internal CD-ROM drive unit can be installed on this server.
■ Contents of the Optional Internal CD-ROM Drive Unit Package
Before installing the internal CD-ROM drive unit, refer to "Appendix B.3 Internal CD-ROM Drive Unit
Specifications" ( pg.294) to check the contents of the optional package.
• Before installation or removal, turn off the server and all peripheral devices.
Also unplug all power cables from the server. Failure to do so may cause
electric shock ( "1.4.3 Turning Off the Server" (pg.32)).
• When installing a CD-ROM drive, hold it by the side.
Applying force to the top can cause failures.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
table: Installable Internal CD-ROM Drive Units
Product name Model Remarks
CD-ROM ATAPI PG-CD321