FUJITSU Primergy RX200 S2 - Manual (Page 239)

239
PRIMERGY RX200 S2 User’s Guide
8
Hardwa
re C
onfigu
rat
ion/Utilitie
s
8.3.4 Global Properties Menu
Configures SCSI BOIS operation during POST.
Select this menu from the header of the [Main] menu.
table: Items on the Global Properties Menu
Item Setting Description
Pause When Boot Alert
Displayed Yes (Fixed parameter) When a hard disk failure occurs during POST and
the logical drive becomes critical, the startup will
be paused. Use this configuration by setting Yes.
Note:
When this configuration is set No, the
following failure may occur. While using the
server without replacing a hard disk and
restarting the system after a hard disk failed,
if the second hard disk failed, the first failed
hard disk may startup depending on the fail
mode. This may result in the system starting
up with old data and losing the new data.
Boot Information Display
Mode Verbose (Fixed parameter) Sets the amount of host adapter or SCSI device
information to be displayed in the POST window.
Negotiate with devices Supported (Fixed
parameter) Sets the SCSI negotiation method.
Video Mode • Color (at the time of
purchase)
• Monochrome
Sets whether or not to display information on the
SCSI Setup Utility in color or monochrome during
POST.
Support Interrupt Hook Interrupt, the Default
(Fixed parameter) Displays the IRQ mode.
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IMx.xx.xx
Esc=Abort/Exit ArrowKeys=Select Item -/+=Change[Item]
Home/End=Select Item Enter=Execute
Pause When Boot Alert Displayed [Yes]
Boot Information Display Mode [Verbose]
Negotiate with devices [Supported]
Video Mode [Color]
Support Interrupt [Hook interrupt, the Default]
Global Properties