FUJITSU Primergy RX200 S2 - Manual (Page 230)

230
Chapter 8 Hardware Configuration/Utilities
8.2.16 Console Redirection Submenu
Appears when [Console Redirection] is selected from the [Server] menu.
This submenu configures detailed settings for console redirection.
table: Items on the Console Redirection Submenu
Item Setting Description
Console Redirection Port • Disabled (at the time of
purchase)
• Enabled
Sets whether to enable or disable console
redirection.
Port Serial Displays the serial port to be used for console
redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Media Type • Serial (at the time of
purchase)
• LAN
Sets the connection type for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
• Serial
Console redirection is performed via the serial
port.
• LAN
Console redirection is performed via the LAN.
Console connection Direct (Fixed parameter) Specifies the method of connection with the
console.
This item appears when [Console Redirection Port]
is set to [Enabled].
Item Specific Help
PhoenixBIOS Setup Utility
Server
Console Redirection Port: [Disabled]
Console Redirection
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values -/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit
Port: Serial
Console connection: [Direct]
Media Type: [Serial]
Mode: [Enhanced]
Flow Control [None]
Protocol: [VT100+]
Baud Rate [9600]