beautypg.com

FUJITSU Primergy RX200 S2 User Manual

Page 235

background image

235

PRIMERGY RX200 S2 User’s Guide

8

Hardwa

re C

onfigu

rat

ion/Utilitie

s

• To exit the SCSI Setup Utility

Select [Exit the Configuration Utility] and press the [Enter] key.

The SCSI Setup Utility closes and the system restarts.

• To return to the [Main] menu

Select [Cancel Exit] and press the [Enter] key.

• To save the current settings

Select [Save changes then exit this menu] and press the [Enter] key.

• To discard the current settings

Select [Discard changes then exit this menu] and press the [Enter] key.

To configure an optional SCSI card or SCSI devices on the SCSI bus

For information on the SCSI card utility, refer to the manual for the card.

In the SCSI Setup Utility, configure each SCSI bus.

See also other documents in the category FUJITSU Computers: