FUJITSU Primergy RX200 S2 - Manual (Page 113)

113
PRIMERGY RX200 S2 User’s Guide
4
Manu
al O
S
In
st
allation
3
Click [OK].
The [Initialization of ServerStart core running] window appears and unattended installation will
be started. Depending on the hardware configuration, this process may take a few minutes. When
the process is completed, the [Create a ServerStart Floppy Disk] window appears.
4
Click [or Insert a ServerStart Floppy Disk to Start ServerStart].
The [Welcome to ServerStart] window appears.
5
Eject the ServerStart floppy disk.
■ Creating Driver Disks
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.