FUJITSU Primergy RX200 S2 - Manual (Page 218)

218
Chapter 8 Hardware Configuration/Utilities
■ Ethernet on Board Submenu
Configures the LAN controller on the baseboard.
Ethernet 1 and Ethernet 2 have the same setting values.
■ PCI Device, Embedded LSI SCSI 1020 Submenu
Configures the SCSI controller on the baseboard.
■ PCI IRQ Configuration Submenu
Sets PCI IRQ assignment for the PCI slots.
■ PCI SLOTS Configuration Submenu
Configures the PCI slots. PCI Slot 1 and PCI Slot 2 have the same setting values.
table: Items on the Ethernet on Board Submenu
Item Setting Description
Ethernet on Board Enabled (Fixed parameter) Sets whether to enable or disable the LAN
controller on the baseboard.
Option ROM Scan • Disabled (at the time of
purchase)
• Enabled
Sets whether or not to initialize the extended ROM.
Latency Timer 0040h (Fixed parameter) Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.
table: Items on the PCI Device, Embedded LSI SCSI 1020 Submenu
Item Setting Description
Device Enabled (Fixed parameter) Sets whether to enable or disable the SCSI
controller on the baseboard.
Option ROM Scan • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to initialize the extended ROM.
Latency Timer 0040h (Fixed parameter) Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.
table: Items on the PCI IRQ Configuration Submenu
Item Setting Description
PCI IRQ Line 0/VGA Auto (Fixed parameter) Sets a PCI IRQ for the VGA controller on the
baseboard.
table: Items on the PCI SLOTS Configuration Submenu
Item Setting Description
Option ROM Scan • Disabled (at the time of
purchase)
• Enabled
Sets whether or not to initialize the extended
ROM. For notes on settings, refer to "7.5.2
Installable Expansion Cards and Notes"
( pg.180).
Latency Timer 0040h (Fixed parameter) Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.