3 installing linux – FUJITSU Primergy RX200 S2 User Manual
Page 120
120
Chapter 4 Manual OS Installation
9
After driver installation, apply Windows 2000 Service Pack.
For details, refer to the description in the window.
Drivers may be replaced with those in the Service Pack during Service Pack application. For
more details, refer to the manual supplied with the hardware.
10
When a SCSI array controller is used for an array configuration or a RAID card
is installed, install RAID Management Tool.
For the installation procedure, refer to "PRIMERGY RX200 S2 Onboard SCSI RAID User's
Guide" or the manual supplied with the RAID card.
The installation of Windows 2000 Server has completed.
●
Before Starting Operation
After OS installation, refer to the following and perform the necessary procedures.
• Installation of high reliability tools
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" ( pg.159) and install
high reliability tools.
• "Chapter 5 Operations after OS Installation" ( pg.127)
Perform the necessary procedures.
4.2.3 Installing Linux
For the use of Linux, refer to the Fujitsu PRIMERGY website