FUJITSU Primergy RX200 S2 User Manual
Page 299
299
PRIMERGY RX200 S2 User’s Guide
Ap
pend
ix
A
2
Enter the following command.
Remote [Enter]
The following message appears.
3
Enter the following command.
Remote [Enter]
The following menu appears.
The "State" line in the message will show either of the following.
4
Use numeric keys to enter the desired menu number.
The table below shows the menu items and corresponding operations. Unavailable menu items
are indicated with "na" in parentheses to the left of that item.
Password>
table: Messages in the Main Menu Window
Message
Status
On
The server is turned on.
Off
The server is turned off.
table: Menu Items and Operations
Menu
Operation
Operation after selecting the item
(1) Immediate
Power Down
The server will be turned off.
When "Do you really want to do this? [y/n]"
appears, enter the following command.
y [Enter]
(2) Immediate Reset
The server will be restarted.
(3) Graceful Power
Down
The server will be turned off.
When Windows is running,
the server is turned off after
the OS is shut down.
When "Do you really want to do this? [y/n]"
appears, enter the following command.
y [Enter]
When Windows is running, "System shutdown
due to
Cancel to abort!" appears in the popup window.
Select [OK].
(4) Power Cycle
The server will be restarted.
When Windows is running,
the server is restarted after the
OS is shut down.
REMOTE MAINTENANCE MENU
(1) Immediate Power Down
(2) Immediate Reset
(3) Graceful Power Down
(4) Power Cycle
(5) Power On
(6) View System Eventlog (SEL)
Enter selection or (0) to quit:
*******************************************
Welcome to System RX200 S2
BMC FW: *.** SDRR: *.**
State: Off (na = Currently not available)
*******************************************