FUJITSU Primergy RX200 S2 - Manual (Page 298)

298
C Remote Control Function and Console Redirection
C.1 Connecting the Server to a PC
Connect the server to a PC using a cross cable.
In the BIOS Setup Utility, perform the following setting.
• On the [Peripheral Configuration] submenu of the [Advanced] menu, change [Serial Multiplexer] to
[BMC].
"8.2.6 Peripheral Configuration Submenu" (pg.216)
C.2 Operating the Remote Control Utility
The following explains how to operate the Remote Control Utility
■ Connection
1
Connect the serial port to the management terminal using an RS-232C cross
cable.
2
Establish connection using the terminal software.
■ Operation on the Server
Perform the following operations in the terminal software on the management terminal.
1
Establish connection using the terminal software and press the [Enter] key.
The following message appears.
Login>
The server (rear)
Personal computer
Cross cable
Serial port
Serial port