FUJITSU Primergy RX200 S2 - Manual (Page 116)

116
Chapter 4 Manual OS Installation
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the onboard SCSI array controller
driver disk created from the ServerStart CD-ROM and press the [Enter] key.
The following message appears.
3. Select the following and press the [Enter] key.
4. When the following message appears, press the [S] key.
5
When a Fibre Channel Controller (PG-FC106) is installed, install the fibre
channel card driver.
1. When the following message appears, press the [S] key.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the fibre channel card driver disk
created from the ServerStart CD-ROM and press the [Enter] key.
The following message appears.
3. Select the following and press the [Enter] key.
4. When the following message appears, press the [S] key.
6
Follow the instructions from the setup program to continue the installation
procedures.
If a message indicating that the driver has failed in the Windows logo test for validating the
compatibility with Windows appears, select [Yes] to continue the installation procedure.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
LSI Logic PCI SCSI/FC MPI Miniport Driver
The driver you provided seems to be newer than the Win-
dows default driver.
To specify additional SCSI adapters, CD-ROM drives,
or special disk controllers for use with Windows
, including those for which you have a device
support disk from a mass storage device
manufacturer, press S.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
Emulex LP9802 PCI-Fiber Channel HBA
The driver you provided seems to be newer than the
Windows default driver.