FUJITSU Primergy RX200 S2 - Manual (Page 216)

216
Chapter 8 Hardware Configuration/Utilities
8.2.6 Peripheral Configuration Submenu
Appears when [Peripheral Configuration] is selected from the [Advanced] menu.
Configures the serial port, parallel port, etc.
table: Items on the Peripheral Configuration Submenu
Item Setting Description
Serial • Disabled
• Enabled
• Auto (at the time of
purchase)
Sets whether to enable or disable the serial port.
Serial Multiplexer • System (at the time of
purchase)
• BMC
• Shared
Changes the function of the serial port.
• System
Uses as a serial port. (Setting for UPS
connection)
• BMC
Enables the remote control function.
"Appendix C Remote Control Function and
Console Redirection" ( pg.297)
This value can be selected when [Serial] is set to
[Disabled].
• Shared
[System] can be switched to and from [BMC]
automatically. The remote control function and
console redirection can be used together.
Floppy Type Local (Fixed parameter) Sets when the internal floppy disk drive is used.
Diskette Controller • Disabled
• Enabled (at the time of
purchase)
Sets whether to enable or disable the floppy disk
controller.
Mouse Controller • Disabled
• Enabled
• Auto Detect (at the time of
purchase)
Sets whether or not to use the mouse connected to
the mouse connector.
Item Specific Help
PhoenixBIOS Setup Utility
Advanced
Serial: [Auto]
Serial Multiplexer: [System]
Floppy Type: [Local]
Diskette Controller: [Enabled]
Mouse Controller: [Auto Detect]
Peripheral Configuration
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values -/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit