FUJITSU Primergy RX200 S2 - Manual (Page 184)

184
Chapter 7 Installing Internal Options
4
Remove the card locking frame.
1. Hold the card locking frame by both ends where green "LIFT UP" stickers are
applied.
2. Twist your wrists inward and lift the frame gently with your fingers.
Remove it carefully. Parts in the frame may come off.
5
Remove the slot cover from the card locking frame.
The slot cover for PCI slot 1 is composed of a low profile slot cover and an extension slot
cover.
Be sure to keep the removed slot cover for later use.
Green stickers (LIFT UP)
1
2
2
Gently lift upward
Card locking frame
Slot cover
Extension
slot cover Low profile
slot cover