FUJITSU Primergy RX200 S2 - Manual (Page 34)

34
Chapter 1 Overview
■ Ejecting the Floppy Disk
1
Make sure that the floppy disk access LED is off. Press the floppy disk eject
button.
The floppy disk is ejected.
1.4.5 Inserting and Ejecting a CD-ROM
This section explains how to insert and eject a CD-ROM.
■ Cautions for Handling CD-ROM Drive
• Use the drive in a dry place with low airborne dust levels. Entry of water, a paper clip, or other liquids
or metal objects can cause electric shock or failures.
• Do not use the drive in a place exposed to shocks or vibration.
• Do not insert any object other than the specified CD-ROMs.
• Do not pull or push the CD-ROM tray forcibly.
• Do not disassemble the CD-ROM drive.
• Clean the CD-ROM tray before use. Use a dry, soft cloth for cleaning.
• When the CD-ROM drive is not used for a prolonged period, eject the CD-ROM to prevent accidents.
To avoid dust or particles, keep the CD-ROM tray closed (in a loaded position).
• This server supports CD-ROMs with the following logo. Do not use CD-ROMs without the logo.
Doing so may cause failures.
• Do not eject the floppy disk while the floppy disk access LED is on. The data
stored on the floppy disk may be damaged.
Off
Floppy disk
eject button
Floppy disk
access LED