Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 95)

Viewing HDMI Status
Mode : Input signal type. ■
HDCP encrypted : whether the signal is HDCP-encrypted. If yes, the
corresponding HDCP version is displayed. If no, None is displayed.
To conform to laws, the device does not support HDCP-encrypted signal.
■
VIC : CEA-specified video identifier. Different values indicate different
combinations of resolution, frame rate, aspect ratio and etc.
■
IT content : whether the picture content is composed according to common
IT practice. If yes, the content is unsuitable for analog reconstruction or
filtering.
■
3D struct : layout of the two views of a 3D video frame, including Side by
side half, Top and bottom ， Frame packing. This parameter is displayed only
for a 3D signal.
■
3D sub-sampling : Sub-sampling method for a 3D video. This parameter is
displayed only for a 3D signal in the Side by side half mode.
■
Pixel rate : pixel clock rate, which indicates the maximum number of pixels
that can be written to local storage per second.
■
Timing - H total : total number of horizontal pixels ■
Timing - H active : number of horizontal active pixels, namely the horizontal
pixels of the current video
■
Timing - H back porch : number of horizontal back porch pixels ■
Timing - H sync width : number of horizontal sync pixels ■
Timing - H front porch : number of horizontal front porch pixels ■
Timing - V total : number of vertical total pixels ■
95