Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 101)

Setting the WEB CAMERA Input
On the Web UI, you can set the audio input and video input connected to the
WEB CAMERA port.
1. In the navigation bar at the upper part of the Web UI, click Input .
2. Click WEB CAMERA at the upper part to view and set related information
about the device connected to the WEB CAMERA port.
Setting WEB CAMERA Video
In the VIDEO area, you can set the following parameters for the video input
connected through the WEB CAMERA port.
Device name : Name of the current device connected to the WEB CAMERA
port. When multiple devices are connected, you can select one from the
drop-down list box.
■
Format : Output format of the device connected to the WEB CAMERA port,
such as YUYV.
For the WEB CAMERA input, USB Fusion currently supports YUYV, H.264,
MJPEG, YU12, UYUV, NV12 formats. YUYV is selected by default if available.
■
Resolution : Select a resolution from the drop-down list box, which lists all
the resolutions supported by the connected device. 720p is selected by
default if available.
■
Frame rate : Select a frame rate from the drop-down list box, which lists all
the frame rates supported by the connected device. 30fps is selected by
default if available.
■
Special effect : Check this to mirror the input, namely, flip the video
horizontally.
■
101