Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 140)

Configuring USB Network
You can use the USB network function to connect a USB cable from the USB
OUT port of USB Fusion to your computer, which establishes a virtual network
between the computer and USB Fusion. This connection is convenient,
especially when other network connections are not available. USB Fusion comes
with a default network IP, namely 192.168.66.1.
Viewing USB Network Information
1. Log in to the web UI as the Admin user.
2. Choose System > Network .
3. In the USB NET area, view USB network connection information:
For the switchback to the Wi-Fi mode to take effect, you need to
reboot your USB Fusion device.
Connection : USB network connection status
Down : The network port is down. Disconnected : No network is
connected. Full Speed : USB 1.1 speed at 12 Mbps High Speed : USB
2.0 at 480 Mbps Super Speed 5G : USB 3.0 speed at 5 Gbps
■
IP Address : IP address of the USB Fusion device ■
Subnet Mask : a 32-bit mask that divides an IP address into two parts,
network address and host address
■
Gateway : IP address of the gateway, which connects different networks ■
Send : data sending speed of USB Fusion ■
140