Magewell USB Fusion HDMI & USB Video Capture Device User Manual
Page 130
default. You can change these NTP servers as needed. For example, you may
change to nearer servers to reduce network latency and improve time accuracy.
ntp.org also provides
1.
Log in to the web UI as the Admin user.
2. Choose
System
>
General
.
3. In the
DATE & TIME
area, enable
Set Time Automatically
.
4. Set domain names for NTP servers.
5. Click
Apply
.
The
Set Time Automatically
switch is enabled by default. If it is
disabled, you need to first enable it.
NTP server 1
: Domain name for NTP server 1, mandatory. The default
is
0.pool.ntp.org
. Make sure you enter a valid domain name.
■
NTP server 2
: Domain name for NTP server 1, optional. The default is
1.pool.ntp.org
. Make sure you enter a valid domain name.
■
Make sure you click this button after configuring. Otherwise, your
configuration will become invalid.
130