Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 152)

How do I configure USB Fusion?
USB Fusion is easy to use. You can even use it without any configuration.
If you need to configure it to meet custom needs, you can go to the Web UI to configure the inputs, outputs, audio, presentation, media, and system.
How do I confirm the A/V inputs are successfully connected?
Can I use one computer as both the streaming computer and source computer?
Streaming computer means the computer connected to the USB OUT port of USB Fusion, which is where the meeting software or streaming software is located.
Source computer means the computer connected to the HDMI 1 or HDMI 2 port of USB Fusion, which can be used to show presentation materials.
It is common practice to use one computer as both the streaming computer and the source computer. However, you will need some extra configuration to make the
video and audio normal. For example, in order for the computer to show only the presentation PPT and no other irrelevant software (such as the meeting software in
use), you need to set up dual monitors on your computer. If you need to use the computer audio, you need to select the device whose name containing USB Fusion
(instead of USB Fusion USB-C ) as your audio output device in your computer system settings.
When the source computer and the streaming computer are the same computer, if there is an infinite loop of the computer screen in the window of the streaming
software, this is because the video signal output by the computer itself returns to the capture card, and the signals overlap infinitely. The graphics card will output
again, and then back again, in an infinite loop. At this time, you can minimize the streaming software and use the desktop content normally, such as PPT presentation,
and the other party in the meeting can see your presentation content normally.
How to use the WEB CAMERA port?
The WEB CAMERA port is a standard USB Type-A port that can support USB A/V sources, which can accommodate a variety of usage scenarios.
Check whether the corresponding light is on. ■
Check the A/V inputs on the Web UI. ■
On the Input tab page, check the connection status and signal information.
In the Volume area on the Audio tab page, check whether the corresponding volume meter jumps.
152