Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 92)

2. Click APP at the upper part.
3. In the Encoding Format area, set the encoding parameters.
4. Click Apply .
Setting Communication Ports
Set the ports used for communication between the USB Fusion device and the
App, for example, when a default port number is disabled in the network.
1. In the navigation bar at the upper part of the Web UI, click General .
2. Click APP at the upper part.
3. In the Port area, set the communication ports.
4. Click Apply .
Resolution : supports 720P and 1080P. The default is 720P. ■
Frame rate : supports 10 FPS, 15 FPS, 24 FPS, 30 FPS and 60 FPS. The
default is 30FPS.
■
Bit rate : supports 256 Kbps through 20 Mbps. The default is 2 Mbps. ■
SSDP discovery : network discovery port. The SSDP protocol is used.
The default is 1900 and cannot be changed.
■
TCP control : port for delivering control instructions. The TCP protocol
is used. The default port is 9000 and can be modified. The value range
is 1 to 65535.
■
SRT stream : port for delivering video streams to the App. The SRT
protocol is used. The default port is 9110 and can be modified. The
value range is 1 to 65535.
■
92