Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 77)

Accessing the Web UI
Accessing the Web UI through a Network Connection
USB Fusion can connect to a network via Ethernet, Wi-Fi, or USB network. For
details about the connection methods, see Configuring network .
After USB Fusion is connected to network, you can use flexible methods to
access its web UI, including:
Access Method Requirements
Use a USB network IP address
The computer is connected to USB
Fusion with the supplied USB cable.
Use Windows network discovery On a Windows Operating system.
Use an Enternet/Wi-Fi IP address
The Ethernet/Wi-Fi IP address of
USB Fusion has been obtained.
Using a USB Network IP Address
USB network provides a virtual network connection. Using this technology, you
only need to connect USB Fusion and your computer with a USB cable so that
your computer can access USB Fusion. Linux, macOS 10.12 and later, and
Windows 10 19H1 and above are supported.
When no Ethernet/Wi-Fi network connection is available, you can conveniently
use this method to access the web UI.
1. Make sure that USB Fusion has connected to power.
2. Connect a USB cable from the USB OUT port of USB Fusion to a computer.
77