Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 150)

Resetting USB Fusion
Both the Admin user and common users can reset USB Fusion. To avoid
unintended resetting, you can only reset the device after connecting to it
through USB network.
1. Use an USB cable to connect USB Fusion and your computer.
2. On the computer, open a browser and enter the USB network IP address
in the address bar.
The default IP address is 192.168.66.1. You are not advised to change this
address unless IP address conflict exists in the local network.
3. Click Reset all settings at the upper right corner of the web UI login page.
In the displayed window, click Reset .
Resetting may take a few minutes to complete. Do not shut down or
operate the device during the resetting.
Note: The resetting will restore your device to default settings. You will
lose your custom settings, presentations, media files, recordings, etc.

150