Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 79)

Choose > , then choose Network and Internet > Network and
Sharing Center > Change advanced sharing settings . Under the current
network (the one marked as current profile ), click Turn on network
discovery .
5. In the Other Devices area, find your USB Fusion device based on the
Device name + Serial number .
6. Double-click the device icon to access the web UI login page.
Using an Ethernet/Wi-Fi IP Address
USB Fusion uses a DHCP-assigned IP address by default, which can effectively
avoid IP address conflict, but can also result in constant IP address changes.
USB Fusion also supports using a static IP address , so that the IP address
remains stable.
If you have obtained the dynamic or static Ethernet IP address, or the Wi-Fi IP
address, you can use the address to access the Web UI of USB Fusion. This
method applies to Windows, Linux, and macOS.
1. Ensure that USB Fusion has connected to power.
2. Connect your computer and USB Fusion to the same network.
To connect USB Fusion to a network:
The default device name is USB Fusion . You can set the device name
on the web UI.
■
The serial number of USB Fusion is the one that can be found on the
device, for example A506211128001.
■
This method does not apply to the first-time access to the Web UI,
because the Ethernet/Wi-Fi IP Address is unknown in this case.
79