Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 144)

5. When the update is completed, click Reboot .
The reboot will automatically disconnect from and then connect to the
network. when the reboot is completed, you will be directed to the web UI
login page.
6. Log in to the web UI again and check Firmware version in the USB Fusion
area on the Dashboard page.
The firmware version should be the one you just updated to.
Updating Firmware Online
1. Log in to the web UI as the Admin user.
2. Choose System > Firmware .
3. In the ONLINE UPDATE area, check if any update is available.
You can click the update icon next to New version to refresh.
4. If update is available, click the Update button.
5. When the update is completed, click Reboot .
the factory version, and you need to update the firmware again.
The update consists of operations including erasing and writing, so you
need to wait for a while.
■
While updating, do not shut down/reboot the device, or disconnect
from the network.
■
If the update is interrupted due to unexpected exceptions (such as
power outage or network disconnection), the firmware will roll back to
the factory version, and you need to update the firmware again.
■
144