Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 133)

Configuring Ethernet
Viewing Network Information
After USB Fusion connects to an Ethernet network through the ETHERNET port,
you can view the following Ethernet connection information in the Ethernet
area on the Network page.
1. Log in to the web UI as the Admin user.
2. Choose System > Network .
3. In the Ethernet area, view Ethernet connection information.
Connection : Ethernet connection status ■
Down : The network port is down.
Disconnected : No network is connected.
10 Mbps, 100 Mbps, 1.0 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps: Ethernet
connection speed
IP Address : IP address of the USB Fusion device ■
Subnet Mask : a 32-bit mask that divides an IP address into two parts,
network address and host address
■
Gateway : IP address of the gateway, which connects different networks ■
Mac address : MAC address of the current network adapter ■
Send : data sending speed of USB Fusion ■
Receive : data receiving speed of USB Fusion ■
133