Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 156)

Can I hear the speech from other meeting attendees on USB Fusion?
Yes, you just need to select USB Fusion USB-C as the speaker in your meeting software.
Why do I hear an echo when monitoring audio?
Check whether the receiving software on your streaming computer has enabled monitoring. If yes, disable the monitoring and you will no longer hear the echo.
USB Fusion can monitor a source audio, and the system audio of the streaming computer. When a source audio reaches the receiving software on a streaming
computer, and the software has enabled monitoring, the source audio will become part of the system audio of the streaming computer, and sent back to USB Fusion,
which means you will hear the audio a second time (the source audio itself, and the source audio returned as the system audio of the streaming computer), thereby
causing the echo.
Web UI
How do I access the Web UI for the first time?
On Windows, Linux, and macOS, you can use the static IP address to access the Web UI for the first time:
1. Make sure that USB Fusion has connected to power.
2. Connect a USB cable from the USB OUT port of USB Fusion to a computer.
The cable connection will establish a network connection between your computer and USB Fusion through USB network.
3. Open a browser on the computer, enter the static IP address for USB network, and press Enter .
The default address for USB network is 192.168.66.1.
How can I access the Web UI?
USB Fusion supports flexible method for accessing its Web UI:
Through an IP address ■
The default USB network IP address is 192.168.66.1.
156