Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 157)

For details, see Accessing the Web UI .
App
USB Fusion is connected to a network, but the App cannot find it?
Check that USB Fusion and the mobile device with the USB Fusion App installed are connected to the same network. If no, the USB Fusion device will not show or will
be in the offline state on the App device connection page.
A Wi-Fi connected iOS device cannot find USB Fusion devices?
On iOS 14 and later, if the iOS device has connected to the same network as USB Fusion but still cannot find USB Fusion, you need to consider whether the required
permission is enabled.
On iOS 14 and later, when you first use USB Fusion App, you will be prompted to allow the App to find and connect to devices on the local network. If you do not
allow, the App will not be able to find USB Fusion devices on the local network.
To allow the App to find USB Fusion devices, go to Settings > Privacy > Local Network , find the USB Fusion App, and turn on the switch next to it.
Can the App control the start and end of my presentation?
The App does not have a switch for starting or ending your presentation.
When USB Fusion is connected to a computer through the USB OUT port, the device starts delivering video/audio streams to the computer. The start of your
presentation depends on the receiving software on the computer.
For ending the presentation, even though there is no end button, you can use the button for your presentation to fade into black and become muted, which
has the same effect as an end button.
How do I annotate a scene in rapid motion?
The Ethernet or Wi-Fi IP address can be obtained from the Web UI.
Through Windows network discovery ■
157