Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 129)

Setting the System Time
USB Fusion uses the system time for time-stamping the A/V input as well as
logging and naming files.
Before using this device, you need to select your time zone and adjust time to
ensure time accuracy.
Selecting a Time Zone
1. Log in to the web UI as the Admin user.
2. Choose System > General .
3. (Optional) In the DATE & TIME area, view Current time .
4. In the DATE & TIME area, select a time zone from the Time zone drop-
down list box. USB Fusion uses (UTC+08:00) Beijing, Shanghai,
Hongkong, Taipei by default.
5. Click Apply .
6. On the displayed dialog box, click Reboot .
The device will reboot. If you click Later , your configuration change will
not apply until after next reboot.
Setting Time Automatically
You can automatically synchronize time from the network.
By default, USB Fusion automatically synchronizes time from NTP servers.
Network Time Protocol (NTP) servers provide network-based time
synchronization service.
There are many NTP servers available on the Internet. You may also deploy
your own ones. USB Fusion uses the NTP servers provided by ntp.org by
129