Magewell USB Fusion HDMI & USB Video Capture Device - Manual (Page 149)

Rebooting USB Fusion
When USB Fusion cannot run properly, you can reboot the device for
troubleshooting.
1. Log in to the web UI as the Admin user.
2. At the upper right corner of the web UI, click the user name, and click
Reboot .
3. In the displayed window, click Reboot .
The reboot will automatically disconnect from and then connect to the
network. when the reboot is completed, you will be directed to the web UI
login page.
Rebooting will not make the current device settings invalid. 
149