Setting the device name, Set the device name – Magewell USB Fusion HDMI & USB Video Capture Device User Manual
Page 128
Setting the Device Name
The device name is the
Device Name
parameter displayed on the
Dashboard
page, and the device name shown in network discovery as well as in USB Fusion
App.
1.
Log in to the web UI as the Admin user.
2. Choose
System
>
General
.
3. In the
DEVICE
area, set
Device name
.
The device name can consist of 1-32 characters. Supported characters: A-
Z, a-z, 0-9, spaces and ._-+'. Spaces cannot be at the start or end.
4. Click
Apply
.
5. Click
Dashboard
in the navigation bar. Check whether
Device name
in
the
USB Fusion
area is changed to the new name.
The device name displayed in network discovery and in USB Fusion App
will also change accordingly.
Make sure you click this button after configuring. Otherwise, your
configuration will become invalid.
128