Baseline Systems BaseStation 3200 V12 - Manual (Page 83)

BaseStation 3200 Advanced Irrigation Controller Manual
Manually Running Zones for a Fixed Time
1. Turn the dial to the Manual position.
2. If the Run Zone(s) for Fixed Time option is highlighted, press the Enter button. If the option is
not highlighted, press the Next/Previous button to highlight it, and then press the Enter
button. The Run Zones screen displays.
3. In the Zone column, press the + button to
highlight the zone that you want to run.
4. Press the Next button to move to the Run
Time column, and then press the + or –
button to set the amount of time for the
manual run.
5. If you want to add another zone to the
manual run, press the Previous button to
return to the Zone column, and then repeat
steps 3 – 4 to set the time for the next zone.
6. Press the Next button to move to the Concurrent Zones field. If you want more than one zone
to run at one time during the manual run, press the + button to change the number in this
field.
7. When you have finished making changes,
turn the dial to the RUN position. When the
manual run starts, the main screen shows the
details.
8. If you want to stop the manual run while it is
active, press the Back button.
Note: When the manual run is complete, the
controller changes the Run Zone(s) for Fixed
Time settings to Off.
Page 77