Baseline Systems BaseStation 3200 V12 - Manual (Page 82)

BaseStation 3200 Advanced Irrigation Controller Manual
9. If you want to manually run another zone in the program, press the Previous button to return
to the Zone/Status column. Repeat steps 6 – 8 to start another zone.
10. Turn the dial to the RUN position.
Manually Running One or All Zones for a Fixed Time
1. Turn the dial to the Manual position.
2. If the Run One or All Zones for Fixed Time option is highlighted, press the Enter button. If the
option is not highlighted, press the Next/Previous button to highlight it, and then press the
Enter button. The Manual screen displays.
3. In the Zone column, press the + button to
highlight ALL or the zone that you want to
run.
4. Press the Next button to move to the Run
Time field, and then press the + or – button to
set the amount of time for the manual run.
5. Press the Next button to move to the Initial
Delay field. If you want the controller to delay
the start of the manual run to give you time
to walk to the zone location, press the + or – button to set the amount of time for the delay.
6. Press the Next button to move to the
Between Zone Delay field. If you chose ALL in
the Zone column, you can use this field to set
a delay between each zone. Press the + or –
button to set the amount of time for the
delay.
7. When you have finished making changes, turn
the dial to the RUN position. When the
manual run starts, the main screen shows the
details.
8. If you want to stop the manual run while it is
active, press the Back button.
Page 76