Baseline Systems BaseStation 3200 V12 - Manual (Page 102)

BaseStation 3200 Advanced Irrigation Controller Manual
Operator Messages
Operator messages are used to
indicate programming errors and to
provide assistance in fixing
common installation and operation
problems. Messages can include
status or warning messages, or
serious controller alarms. The
message shows the time and date
of the alert. The message also
includes suggestions for correcting
the issue.
To display the messages
1. When the main screen indicates that messages exist, turn the dial to the Messages position.
2. If there are multiple messages, press the + or – button to scroll through the messages.
3. To clear the message, press the Next button to highlight the Delete field, and then press the
Enter button.
Pause Messages
A variety of conditions will cause the controller to pause watering, either by specific programs or
the entire controller. When one or more pause conditions occur, the Pause Condition reports
describe the reasons for the pause conditions.
The following pause conditions can occur on the BaseStation 3200.
BL-Commander
(handheld
radio)
• All programs will be paused while running a zone using the remote
handheld radio – all programs resume when the zone is shut off.
• Automatically cleared when the zone is done.
Event Day • An event day stops all watering and keeps programs from starting.
• To delete the message, press Next to move to the Delete option, and
then press Enter.
• Automatically cleared when the event day ends.
Flow Devices • A high-flow shutdown or an over-budget shutdown stops the system
from using the specific flow device.
• To delete the message, press Next to move to the Delete option, and
then press Enter.
• Deleting the message does not clear an over-budget condition. Change
the budget or wait until next month.
• Not automatically cleared – the user must clear this pause condition.
Page 96