Baseline Systems BaseStation 3200 V12 - Manual (Page 59)

BaseStation 3200 Advanced Irrigation Controller Manual
1. Turn the dial to the Smart Watering position.
2. Press the Next or Previous button to select
Program Seasonal Adjust, and then press the
Enter button. The Season Adjust screen
displays and shows all programs set to 100%.
3. Press the + button to move to the program
where you want to adjust the percentage.
4. Press the Next button to move to the Budget
% column.
5. Press the + or – button to change the
percentage. You can set the percentage
between 10 and 500%.
6. After you have configured the settings for the current program, perform one of the following
actions:
 To configure another program, press the Enter button until the number of the program
that you want to configure displays in the Program field at the top of the screen. Repeat
steps 4 and 5.
 When you have finished making changes, turn the dial to the RUN position.
Associating Zones with a Program
In your landscape, you probably have zones that need to be watered every day (such as those that
water turf areas) and other zones that need to be watered less frequently (such as shrub borders).
In order to manage these different watering schedules, it is best to create separate programs for
the turf and the shrubs and then associate the zones that water the specific landscape area with
the appropriate program.
Prerequisites
• The zones have been correctly assigned in the controller.
• You know the numbers of the zones that water the specific landscape areas.
1. Turn the dial to the Zones position. The Zones
screen displays.
2. In the Zone field, press the + or – button to
select the number of the zone that you want
to associate with a program.
3. Press the Previous button to go to the
Program field.
4. Press the + or – button to select the program
that you want the zone to be associated with.
Page 53