Baseline Systems BaseStation 3200 V12 - Manual (Page 117)

BaseStation 3200 Advanced Irrigation Controller Manual
3. Setting Up a Primary Zone on page 41 of the BaseStation 3200 Advanced Irrigation Controller
Manual.
4. Determine how the irrigation zones for each hydrozone will be put into a scheduling group.
Link the other zones in the scheduling group to the primary zone so they will be watered
more or less relative to it. In the BaseStation 3200 controller, you will link the zones in the
scheduling group to the primary zone. Refer to Linking Zones (Creating a Scheduling Group)
on page 42 of the BaseStation 3200 Advanced Irrigation Controller Manual.
Note: When you are connecting biSensors, wire them across the valve wires that are on
terminals A-1, A-2, B-1 or B-2 because only these terminals support biSensors that are wired
across valve connections. You can only connect one biSensor per terminal. If you have more
than four biSensors, you will need to run two-wire for the additional biSensor connections.
Connector biCoder
S/N
biSensor
S/N
Zone # on
BaseStation
Old
Zone
#
Hydrozone Program Run
Time
A-1 VA00001
A-2 VA00002
A-3 VA00003
A-4 VA00004
A-5 VA00005
A-6 VA00006
A-7 VA00007
A-8 VA00008
A-9 VA00009
A-10 VA000010
A-11 VA000011
A-12 VA000012
B-1 VB00001
B-2 VB00002
B-3 VB00003
B-4 VB00004
B-5 VB00005
B-6 VB00006
B-7 VB00007
B-8 VB00008
Page 111