IntelliTrack Package Track - Manual (Page 26)

I NTELLI T RACK DMS: P ACKAGE T RACK V 8.1
User Manual
12
10. Make sure that User Account Control (UAC) is disabled. Please see
“Disabling User Account Control in Windows Vista/Windows Server
2008” on page 8
.
11. Determine the IntelliTrack Device Installation that you will use for
installing the IntelliTrack DMS application to your device. Please refer
to
“Determining your Device Installation” on page 32 .
Batch
Installation
Prerequisites
for Windows
XP/Windows
Server 2003 If you are using Windows XP or Windows Server 2003, follow these basic
steps for batch installation preparation.
1. Familiarize yourself with the RDA components “Remote Data Access
(RDA) Components” on page 15 for more information.
2. Determine your RDA configuration. Please refer to “RDA Configura-
tion” on page 18 for more information.
3. Make sure that IIS is installed and operational. You will use IIS 5.1
with the Windows XP Professional Operating System. Please refer to
your Windows documentation for more information on installing IIS.
4. Install Microsoft ActiveSync and establish a partnership with your
device. Make sure that the connection setting is set for “work net-
work.” Please refer to
“Installing Microsoft ActiveSync on your Desktop
Computer” on page 25 , “Required ActiveSync Work Network Setting” on
page 25 , and “Setting Up a Sync Relationship” on page 26 for more
information.
5. If you are using a Firewall, specific ports must be set as exceptions.
Please refer to
“Applying Firewall Exceptions” on page 28 for more
information.
6. Test your IIS setup after you install IntelliTrack by going to the DMS
Batch Synchronization Utility and testing the Sync URL setting. Please
refer to
“Sync URL Setting” on page 30 .
7. Determine your Device Installation. Please refer to “Determining your
Device Installation” on page 32 .
Windows Server 2003 Requirement AFTER DMS
Installation
Windows Server 2003 uses IIS v6. If you are using Windows Server 2003,
follow all the steps for Windows XP. After you install IntelliTrack, set up
the web service extensions for IntelliTrack DMS. Please refer to
“Setting
up IIS v6.0 to Allow the DMS Web Service Extension” on page 13 .