IntelliTrack Package Track User Manual
Page 181
Chapter 9
Using the Handheld
167
Transferring Data from the Device via the Wireless Batch
Connection
You are able to transfer data from the device via the wireless batch connec-
tion. However, before using wireless batch, you must use an ActiveSync or
Windows Mobile Device Center connection to send the sync config files to
the Handheld application from the Batch Synchronization Utility. After
you establish your sync routine in the Batch Synchronization Utility, you
are able to transfer data wirelessly from the handheld device. When you
transfer data via the handheld device options, the application will use the
sync configuration settings that have been established in the Batch Syn-
chronization Utility. This means that if you have placed package and recip-
ient filters for sending data in the Batch Sync Utility, these filters will also
apply to the data synchronization that is done via the handheld.