IDEC MicroSmart User Manual
Page 114
4: O
PERATION
B
ASICS
4-2
« FC4A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
»
Computer Link through Port 2 (RS485)
When connecting a Windows computer to port 2 on the all-in-one 16- or 24-I/O type CPU module or slim type CPU mod-
ule, enable the maintenance protocol for port 2 using the Function Area Settings in
WindLDR
To set up a 1:1 computer link system using the all-in-one 16- or 24-I/O type CPU module, install an optional RS485 com-
munication adapter (FC4A-PC2) to the port 2 connector. Connect a computer to the RS232C/RS485 converter (FC2A-
MD1) using the RS232C cable (HD9Z-C52). Connect the RS232C/RS485 converter to the CPU module using the user
communication cable 1C (FC2A-KP1C). The RS232C/RS485 converter is powered by an 24V DC source or an AC
adapter with 9V DC output. For details about the RS232C/RS485 converter, see page 26-4.
To set up a 1:1 computer link system using the slim type CPU module, an optional RS485 communication module (FC4A-
HPC2) is needed. The RS485 communication adapter can also be installed on the HMI base module (FC4A-HPH1).
RS232C
D-sub 9-pin
Female Connector
Por t 2
RS485 Communication Adapter
FC4A-PC2
RS232C Cable
HD9Z-C52
1.5m (4.92 ft.) long
RS232C/RS485 Conver ter
FC2A-MD1
User Communication Cable 1C
FC2A-KP1C
2.4m (7.87 ft.) long
A:
Pin 1
B:
Pin 2
SG: Pin 7
All-in-One Type
CPU Module
Slim Type
CPU Module
Slim Type
CPU Module
RS485 Communication Module
FC4A-HPC2
Por t 2
HMI Base Module
FC4A-HPH1
Por t 2
RS485 Communication Adapter
FC4A-PC2