Loading media – HP 700 User Manual
Page 88
3-10
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 3-10 (seq: 86)
This is the black on page 3-10 (seq: 86)
Loading Media
To Change a Roll
1
Make sure the plotter wheels are locked (the brake lever pressed down) to prevent
the plotter from moving.
2
If the old roll is not used up, then to remove the media from the media path:
a
Raise the media lever to release the media.
b
Open the roll cover and turn the media stop to wind the media out of the
plotter and onto the roll.
Raise the lever
Wind the roll
c
Lower the media lever.
1840a
Working With Media and Cartridge(s)
Loading Media