HP 700 User Manual
Page 32
1-12
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-12 (seq: 30)
This is the black on page 1-12 (seq: 30)
3
Remove the new roll from its wrapping. Remove the end cap from the top
of the spindle, and slide the new roll onto the spindle. The leading edge of
the media must wind clockwise.
If the media stop falls off, push it back
in until it snaps into position.
End cap removed.
A
0015
4
Push the end cap back in, making sure that the tabs are flush against the ends of
the roll. Push it far enough to be firm, but do not use excessive force as this
may break the tabs.
B
0016
Setting Up the Plotter
Task 4: Load Media