HP 700 - Manual (Page 58)

1-38
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-38 (seq: 56)
This is the black on page 1-38 (seq: 56)
Other Applications
If you are going to use applications other than AutoCAD or Microsoft Windows
applications, first check any Software Application Notes supplied with this plotter,
to see if the application is covered there. If not, here is some general advice:
The device list in your software may not be up to date with the latest plotters
available. If the HP DesignJet 700 or HP DesignJet 750C Plus is not quoted by
name in your application’s device list, select an alternative plotter as follows:
Preference Device Comments
1 HP DesignJet 750C or
HP DesignJet 755CM
2 HP DesignJet 350C or
HP DesignJet 330
3 HP DesignJet 250C or
HP DesignJet 230
4 HP DesignJet 220
5 HP DesignJet 650C With a preference for
C2858B/C2859B rather than
C2958A/C2859A
6 HP DesignJet 200
7 HP DesignJet 600 or
HP DesignJet
8 HP-GL/2 Device or a similar option including a
reference to HP-GL/2
9 HP 7600
10 HP 7595B DraftMaster SX or
HP 7596B DraftMaster RX or
HP 7599A DraftMaster MX or
HP 7595C DraftMaster SX Plus or
HP 7596C DraftMaster RX Plus or
HP 7599B DraftMaster MX Plus
11 HP 7586B If you choose these devices
you may not be able to use
l ’ ll l
12 HP 7580 or
HP 7585
your plotter’s parallel
connection – depending on
the application software.
The devices in the gray boxes support only HP-GL. The others support HP-GL/2
and HP-GL.
Setting Up the Plotter
Task 9: Set Up Your Software