HP 700 User Manual
Page 37
1-17
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-17 (seq: 35)
This is the black on page 1-17 (seq: 35)
11
a
When the front panel instructs you, lift the media lever.
b
Take hold of the edges of the media now extending from the exit slot and pull
the media toward you until taut. Then align the left and right edges of the
media so that they are flush with the edges of the roll.
c
When the front panel instructs you, lower the media lever.
A
B
0018
12
a
When the plotter instructs you to close the roll cover, rewind the media stop
in the direction shown by the large arrow below, to take up any slack in the
roll. Make sure that the leading edge of the media is outside the roll cover,
and then close the cover.
b
Press the
↓
key to continue. The plotter automatically trims off the first few
inches of media.
c
The roll media is now loaded and ready for plotting.
1840
Setting Up the Plotter
Task 4: Load Media
SETUP
1